[TRNSYS-users] problem with new Type fortran code debugging in CVF

[Avesani Stefano]

Dear all,
I'm trying to debug a Fortran TRNSYS new type code in order to find out
wheter my Type works properly or not!
I get an error answer connected to the executable file (I have set the
"Executable for debug session" as my MytypeXXX.dll in the Project
setting).
 
In general: is the debugging of a new fortran code written for a new
TRNSYS type creation possible (using the typical code structure of a
TRNSYS type as explained in the manual!)?
 
I tried also with MVS 2005 and I got the following error "Visual Studio
cannot debug because a debug target has not been specified".
 
Thanks for collaboration!!
Best regards
 
Stefano Avesani
 
Institute for Renewable energy 

EURAC research
Viale Druso 1, I-39100 Bolzano

t +39 0471 055 345

f +39 0471 055 039

stefano.avesani at eurac.edu

www.eurac.edu <http://www.eurac.edu/>  

 

This transmission is intended only for the use of the addressee and may
contain confidential or legally privileged information. 
If you receive this transmission by error, please notify the author
immediately by mail and delete all copies of this transmission and any
attachments. 
Any use or dissemination of this communication is strictly prohibited by
the "Privacy-Code", D.Lgs. 196/2003 and may conduct to penal prosecution
and liability for damages.

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20081107/2c1b26b7/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ProblemDebuggingFORTRANnewType.bmp
Type: image/bmp
Size: 393334 bytes
Desc: ProblemDebuggingFORTRANnewType.bmp
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20081107/2c1b26b7/attachment-0005.bin>