[TRNSYS-users] Air to air heat pump

[François Leurident]

Dear sir,



I'm a Belgian student and I have a problem to simulate a air-to-air
heat pump. I use the type 665. The simulation works but there is a
strange gap in the graph when the heat pump switch on and switch off. I
have introduced the outlet temperature of the pump by using the type
ventilation in Trnbuild. The building is a multizone building (2 zones,
dowstairs and upstairs) and I have a lot of questions about the
coupling when the pump is on. I have attached a picture to show the
problem.



Could you help me? All apologies for my bad English.



Thank you very much.



Best regards.



François Leurident

Student (ingeneer in architecture)

"Faculté Polytechnique de Mons, Belgique"
             
               Pygargue  (° o °) 
                     
<

_________________________________________________________________
Windows Live vous offre des produits 100 % gratuits !
http://get.live.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20080527/035bcb35/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Gap.jpg
Type: image/jpeg
Size: 526992 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20080527/035bcb35/attachment-0001.jpg>