[TRNSYS-users] Stirling Engine

Leen Peeters leen.peeters at mech.kuleuven.be
Wed May 14 06:52:32 PDT 2008


Dear,

there has been created some code for a Stirling micro-CHP in theframework of the IEA annex 42. But no user-interface has been made yet.You will find more info on the web page: cogen-sim.net

hope this helps,

Leen Peeters
University of Leuven
Postbox: 02421 
APPLIED MECHANICS AND ENERGY CONVERSION
office number 02.050
Celestijnenlaan 300A
3001 Heverlee

Belgium
Phone +32-16-322.518
  ----- Original Message ----- 
  From: Gavin Goodchild 
  To: trnsys-users at engr.wisc.edu 
  Sent: Wednesday, May 14, 2008 3:05 PM
  Subject: [TRNSYS-users] Stirling Engine


  I was wondering if anyone had created a component for TRNSYS of a Stirling engine? I've read through the archive and it has been mentioned before, but I haven't been able to find one. 

   

  Any help is much appreciated. 

   

  Cheers, 

   

  Gavin Goodchild

   



------------------------------------------------------------------------------


  _______________________________________________
  TRNSYS-users mailing list
  TRNSYS-users at engr.wisc.edu
  https://www.cae.wisc.edu/mailman/listinfo/trnsys-users


Disclaimer: http://www.kuleuven.be/cwis/email_disclaimer.htm

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20080514/a18a9daf/attachment-0001.htm>


More information about the TRNSYS-users mailing list