[TRNSYS-users] value of thickness

[Technical Support]

Rahma,  There are two options that you could consider. If the greenhouse covering is transparent or translucent, I would suggest that you define the material in Lawrence Berkeley National Lab's Window5 software and import the resulting window into Type56. If you do not want to worry about visible light transmittance, simply define the material as a purely resistive (massless) layer.Kind regards, David




Technical Support TeamThermal Energy System Specialists, LLC2916 Marketplace Dr, Suite 104Madison, WI 53719techsupport at tess-inc.com

----- Original Message -----

Subject: [TRNSYS-users] value of thickness

From: "Rahma GUECHCHATI" >;rguechchati at gmail.com>

Date: Thu, May 8, 2008 12:34




hello ;we want to used a plastic 200 micron to building a greenhouse but the software eject this value of thickness.Is it method to define this value ?Regards,Rahma Guechchati


_______________________________________________TRNSYS-users mailing listTRNSYS-users at engr.wisc.edu
https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20080509/294cf79e/attachment-0001.htm>