[TRNSYS-users] drop-in DLLs error

[Edward Halawa]

Chatchawan,

 

It may be worth trying the following.

 

In the Studio, click on: File -> Settings ...-> Directories.

 

Check (make sure) that the paths of your TRNSYS/TRNSED/TRNBUILD .. etc. applications point to the directory where you installed your TRNSYS and its subprograms. So, check the name of the directory where you installed TRNSYS (is it: C:\Program Files\Trnsys16_1 OR C:\Program Files\Trnsys16 OR else ?) Then make sure this path is reflected in the "Settings" in the "Directories".

 

Unfortunately, "ERROR 1000 - check the list file for more information", is one the most frustrating error messages I often encounter when running TRNSYS.



e. halawa

From: Chatchawan Chaichana [mailto:c.chaichana at gmail.com] 
Sent: Thursday, 13 March 2008 7:40 AM
To: trnsys-users at engr.wisc.edu
Subject: [TRNSYS-users] drop-in DLLs error

 

Dear All
Regarding upgrading from 16.0 to 16.1 and the problem with drop-in DLLs, I followed instruction as David Bradley mentioned (see below). However, I still couldn't get my project run. Even any of the examples won't run. 

Before I installed 16.1, I completely removed 16.0. I even remove the directory "Transys16". At this point, I could run the examples (I mostly tested with SDHW). Then, I installed TESS libraries. Now I can not run the example any more. I copied all the DLLs in "..\Trnsys16\UserLib " and put them in "..\Trnsys16\UserLib\ReleaseDLLs". This doesn't help. I still got Error 1000.

I'm running WinXP with SP3.

Can anyone help me?

Best regards,
Chatchawan


---------- Forwarded message ----------
From: David Bradley <bradley at tess-inc.com>
To: tchanche fankam bertrand <tfb_tchanchef at yahoo.fr>, TRNSYS USERS <trnsys-users at engr.wisc.edu>
Date: Thu, 10 May 2007 08:44:37 -0500
Subject: Re: [TRNSYS-users] problem after the update TRNSYS16.01
Bertrand,
  You need to take all of the files with the extension *.dll from the 

..\Trnsys16\UserLib 

directory and put them into either ..\Trnsys16\UserLib\ReleaseDLLs

\  or ..\Trnsys16\UserLib\DebugDLLs\ depending on the mode on which your external DLLs were compiled and linked. If you aren't sure which mode the DLLs are compiled and linked in, put them into ..\Trnsys16\UserLib\ReleaseDLLs\.

Cheers,
 David



At 02:14 5/10/2007, tchanche fankam bertrand wrote:



Dear all,
I have updated my version of trnsys 16 but it does not work. The message below appears when i try to run any project.
 
ERROR 1000
check the list file for more information
 
and in the list file it is written;
TRNSYS MESSAGE 196: with the release of TNSYS 16.1 drop-in dlls must be located in \ReleaseDlls or in \DebugDlls subdirectory of Userlib.
 
Please, Can anyone explain to me what i should do to solve the problem,
Thanks in advance,
yours, 
 


------------------------
TCHANCHE FANKAM Bertrand

C/O SUH Christopher
22 kadmeas-BOTANIKOS
11855 Athens, GREECE
mobile:+30 694 295 5952
office: +30 210 529 4046


Découvrez une nouvelle façon d'obtenir des réponses à toutes vos questions ! Profitez des connaissances, des opinions et des expériences des internautes sur Yahoo! Questions/Réponses <http://fr.rd.yahoo.com/evt=42054/*http:/fr.answers.yahoo.com> . 
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at engr.wisc.edu
https://www.cae.wisc.edu/mailman/listinfo/trnsys-users








-- 
----------------------------------------------------------------
Dr. Chatchawan Chaichana
Department of Mechanical Engineering
Faculty of Engineering
Chiang Mai University, 50200
THAILAND
URL: http://www.thaienergydata.in.th/chatchawan
Tel: +66 5394 2009
Fax: +66 5389 2375
---------------------------------------------------------------- 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20080313/974c067d/attachment-0005.htm>