[TRNSYS-users] Existing Model of Horizontal pipe array...?

[David Bradley]

Francois,
Sorry for the delay in getting back to you. My colleague Jeff Thornton 
has been doing a good bit of modeling of horizontal buiried pipe arrays 
and in so doing has written a few models. I am not sure which of them 
are in the best shape to be distributed but if you can send some 
additional information about the configuration that you are trying to 
model (flow patterns, field characteristics, etc. then I might be able 
to make some suggestions.
kind regards,
David


Francois wrote:
>
> Hi everybody,
>
> I’m trying to model an horizontal pipe array (equivalent to the one 
> used for a heat pump), by using the Type 556 = detailed buried 
> pipe(from the TESS library).
>
> With that, we can get the heat transfer from the pipe to the ground, 
> but we can’t model the “interference” caused by the nearby pipes (in 
> our case we have 10 parallel pipes spaced by 250 mm), reducing the 
> efficiency of the heat transfer (compared to 10 isolated pipes in the 
> ground).
>
> _My question is_ :
>
> Has someone already made a model of an horizontal pipe array 
> constituted by _parallel arrays_ *or* tried to modify the type 556 for 
> this aim?
>
> Thank you.
>
> François Badinier
>
> Development Engineer
>
> ICAX Ltd
>
> 1 Hatfield House
>
> Baltic Street West
>
> London EC1Y OST
>
> francois.badinier at icax.co.uk <mailto:alan.kiff at icax.co.uk>
>
> www.icax.co.uk <http://www.icax.co.uk>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at engr.wisc.edu
> https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
>   

-- 
***********************************************************************
Thermal Energy System Specialists (TESS), LLC 
David BRADLEY                      2916 Marketplace Drive - Suite 104 
Partner                            Madison, WI 53719 
                                   USA
P: +1.608.274.2577 
F: +1.608.278.1475
E-mail: bradley at tess-inc.com 
Web Pages:  http://www.tess-inc.com    and      http://www.trnsys.com

***********************************************************************