[TRNSYS-users] building internal gains

[knut.erik.enerstvedt at niva.no]

Borges,

If you want to have 4 W/m2 as internal gain in the building, you can do
that in TRNBUILD by selecting the zone(s) in question, click on Gains,
click on Add and choose new. Here you can enter the 4 W/m2 as radiative
power or convective power (calculate it in kJ/hr) and choose whether it
should be a constant gain, an input value or perhaps a schedule.

Hope this helps.

Kind regards,
Knut Erik



                                                                           
             trnsys-users-requ                                             
             est at engr.wisc.edu                                             
                                                                        To 
             06/11/2008 07:03          trnsys-users at engr.wisc.edu          
             PM                                                         cc 
                                                                           
                                                                   Subject 
             Please respond to         TRNSYS-users Digest, Vol 42, Issue  
             trnsys-users at engr         10                                  
                 .wisc.edu                                                 
                                                                           
                                                                           
                                                                           
                                                                           
                                                                           





----- Message from m 980424 <m980424 at hotmail.com> on Wed, 11 Jun 2008
08:57:33 +0000 -----
                                                                           
           To: <trnsys-users at engr.wisc.edu>                                
                                                                           
      Subject: [TRNSYS-users] building internal gains                      
                                                                           

Hi

I'm doing an energy analysis of a multizone residential building.

I'm having problem characterizing the internal gains of the building. In
Portugal, when applying the legislation, we have to input 4 W/m2 for the
sum of all (persons, equipment and lighting) the internal gains of the
building. How can I do that in TRNBUILD?

Thanks

Borges







----------------------------------------------------------------------------------------------------------------------
NIVAs hovedkontor har flyttet til nye lokaler i CIENS - Forskningssenter
for miljø og samfunn; Gaustadalléen 21, 0349 Oslo. Meld deg på vårt
nyhetsbrev på www.niva.no