[TRNSYS-users] How to get hourly values

[Technical Support]

Henk,
 It depends which output device you are using. The printer (Type25) has a parameter that allows you to set the printing interval in hours. By default I believe that the printing interval is set to the variable name "STEP" which causes one line per time step in your output file. Be careful, however, when you set the print interval to 1, you will get the average value of each output over the preceding time step (not over the preceding hour). If you want the average value over the preceding hour, you will also have to use an integrator before the printer.
Kind regards,
 David





Technical Support TeamThermal Energy System Specialists, LLC2916 Marketplace Dr, Suite 104Madison, WI 53719techsupport at tess-inc.com

----- Original Message -----

Subject: [TRNSYS-users]  How to get hourly values

From: "Henk Stijnen" >;Stijnen at dwa.nl>

Date: Tue, June 10, 2008 10:21





Hi all,
 
I've a TRNsys schema with basic time step 1 hour. In consequence of convergence problems I've set in Control Cards the simulation time step to 0.125, resulting in 8 simulations per hour. And also 8 lines per hour to my output files. 
Now I want to have 1 resulting line per hour. E.g. the mean value of the 8 intermediate values. How can I do that?
 
Thanks for help
 
Henk

_______________________________________________TRNSYS-users mailing listTRNSYS-users at engr.wisc.edu
https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20080610/39d03923/attachment-0001.htm>