[TRNSYS-users] type56 Bugs?

Thu Jan 3 03:17:19 PST 2008

Hi Fuqiao,

I just set the cooling power in a project of mine to a variable value and it works just fine. Did you connected Q_HEATING to the correct input?

Regards, 

Met vriendelijke groet,

Jan-Willem van Laer, Assistent Projectleider

Cauberg-Huygen Raadgevende Ingenieurs BV

Bezoekadres:

Boterdiep 48, 3077 AW Rotterdam

Postadres:

Postbus 9222, 3007 AE Rotterdam

Telefoon:

010 - 4257444

Fax:

010 - 4254443

E-mail:

j.vanlaer at chri.nl

Web:

www.chri.nl

KvK-nummer:

14623897

Disclaimer:

Op deze e-mail is een disclaimer van toepassing:
A disclaimer is applicable to this e-mail, please refer to:
 <http://www.chri.nl/emaildisclaimer> http://www.chri.nl/emaildisclaimer

  _____  

Van: Fuqiao.Wang at fulcrumfirst.com [mailto:Fuqiao.Wang at fulcrumfirst.com] 
Verzonden: donderdag 3 januari 2008 11:46
Aan: Timo.Sengewald at bls-energieplan.de; trnsys-users at engr.wisc.edu
Onderwerp: Re: [TRNSYS-users] type56 Bugs?

hi, all

in type 56, in cooling/heating type manager, you can not set the cooling/heating power as input variable, they do not work! however, if you use unlimited power or constant, it works pretty well !

Can anybody try this and tell me why?

thank you in advance!

Best wishes!

Fuqiao Wang 
Sustainable Consulting Engineer 
FULCRUM CONSULTING 
London:         Tel: +44 (0)20 7520 1300/1305   
Edinburgh:      Tel: +44 (0)131 226 0220        
Spain:          Tel: +34 98 5195989 
mailto:Fuqiao.Wang at fulcrumfirst.com     
www.fulcrumfirst.com     

  _____  

From: Timo Sengewald [mailto:Timo.Sengewald at BLS-Energieplan.de] 
Sent: 2008年1月3日 10:33
To: trnsys-users at engr.wisc.edu
Subject: [TRNSYS-users] type56 Bugs?

No idea what this may be. It would be helpful if you sent your .bui and .dck to the list. Perhaps some body else can have a look at it, too.

Timo

  _____  

Von: Fuqiao.Wang at FulcrumFirst.com [mailto:Fuqiao.Wang at FulcrumFirst.com] 
Gesendet: Donnerstag, 3. Januar 2008 11:25
An: Timo Sengewald
Betreff: RE: [TRNSYS-users] type56 Bugs?

hi, Timo

the room temperature does not change when you are using this type as shown.

 (I mean no matter how big input value you gave. the room temperature still went upto 40 even you set the temperature at 26 deg C, however, if a constant being inputted, it works pretty well! )

(the similar things happens in heating type mode! )

thank you for your quick response.

Regards

Fuqiao Wang 
Sustainable Consulting Engineer 
FULCRUM CONSULTING 
London:         Tel: +44 (0)20 7520 1300/1305   
Edinburgh:      Tel: +44 (0)131 226 0220        
Spain:          Tel: +34 98 5195989 
mailto:Fuqiao.Wang at fulcrumfirst.com     
www.fulcrumfirst.com     

  _____  

From: Timo Sengewald [mailto:Timo.Sengewald at BLS-Energieplan.de] 
Sent: 2008年1月3日 10:07
To: Fuqiao Wang
Subject: AW: [TRNSYS-users] type56 Bugs?

Fuqiao,

what in detail is the problem? All seems fine in the screen shot. What happens when you run the simulation?

Timo

BLS Energieplan GmbH
i. A. Timo Sengewald

Elsenstraße 106
D-12435 Berlin
Tel.: +49 30 53 32 81-0
Fax: +49 30 53 32 81-40
____________________________________________________
BLS Energieplan GmbH
Sitz der Gesellschaft: Berlin
Geschäftsführer: Christoph Lange, Wolfgang Sturm
Registergericht: Amtsgericht Berlin-Charlottenburg, HRB-Nr. 32021 

  _____  

Von: Fuqiao.Wang at fulcrumfirst.com [mailto:Fuqiao.Wang at fulcrumfirst.com] 
Gesendet: Donnerstag, 3. Januar 2008 10:38
An: trnsys-users at engr.wisc.edu
Betreff: [TRNSYS-users] type56 Bugs?

Dear All

Happy new Year!

please help me with my problem as attached. in Type 56, when a cooling type being set as an input limited power, it does not work. I 've tried this power by using a constant, or unlimited power, both work fine.

what's wrong with it?

Thank you in advance.

Best wishes

Fuqiao Wang
Sustainable Consulting Engineer
FULCRUM CONSULTING
London: Tel: +44 (0)20 7520 1300/1305 
Edinburgh: Tel: +44 (0)131 226 0220 
Spain: Tel: +34 98 5195989
mailto:Fuqiao.Wang at fulcrumfirst.com 
www.fulcrumfirst.com 

-----Original Message-----
From: trnsys-users-request at engr.wisc.edu [mailto:trnsys-users-request at engr.wisc.edu] 
Sent: 2008年1月2日 18:03
To: trnsys-users at engr.wisc.edu 
Subject: TRNSYS-users Digest, Vol 37, Issue 1

Send TRNSYS-users mailing list submissions to
trnsys-users at engr.wisc.edu 

To subscribe or unsubscribe via the World Wide Web, visit
https://www.cae.wisc.edu/mailman/listinfo/trnsys-users 
or, via email, send a message with subject or body 'help' to
trnsys-users-request at engr.wisc.edu 

You can reach the person managing the list at
trnsys-users-owner at engr.wisc.edu 

When replying, please edit your Subject line so it is more specific than "Re: Contents of TRNSYS-users digest..."

Fulcrum Consulting is proud to be a Founding Member of the UK Green Building Council. To find out more visit http://www.ukgbc.org

******************* email confidentiality notice *************************

This message is intended for the addressee recipient only. It is private and confidential. If you have received this message in error, please notify the sender immediately and remove it from your system. If you are not the intended recipient you must not use, disclose, distribute, copy, print or rely on this email. Fulcrum First Ltd Incorporated in England and Wales with Registered Number: 03401753. Registered Office: 62-68 Rosebery Avenue, London EC1R 4RR

************* Fulcrum First Ltd trading as Fulcrum Consulting ************* 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20080103/a5e34085/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.gif
Type: image/gif
Size: 7599 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20080103/a5e34085/attachment-0005.gif>