[TRNSYS-users] linking problems solved

[Michaël Kummert]

Laurent,
I have been using that update (6.6C3) for a while and I haven't found any
problem. There were indeed some problems with the first iterations of update
C (6.6C1 and 6.6C2) but they were fixed in 6.6C3, and to my knowledge the
"6.6C3" update is the only one that is still available. 
Regards,
 
Michaël Kummert
ESRU - University of Strathclyde
 


________________________________

	From: Serres Laurent [mailto:laurent.serres at univ-rennes1.fr] 
	Sent: 19 February 2008 17:13
	To: Michaël Kummert
	Cc: trnsys-users at engr.wisc.edu
	Subject: Re: [TRNSYS-users] linking problems solved
	
	
	Michaël Kummert a écrit : 

		Adriana, 
		
		

			I've just solved the problems I was speaking about
in my previous e-mail. 
			By upgrading from CVF 6.6.0 to 6.6.B the rebuilding
of the dll seems to work succesfully, 
			I wonder why. 
			


		Because TRNSYS uses some features that were implemented (or
fixed) in that update, such as the DLL export instructions, etc. This is why
we insist so much on the need for the 6.6B update. It seems that "so much"
is not enough yet so this is a good opportunity to remind all users that
they will save time and frustration if they use Compaq Visual Fortran 6.6B
and not any of the other versions (there is a 6.6C update but it is not
required by TRNSYS and introduces some problems so we do not recommend that
you install it --- OK, more clearly: Use 6.6B and nothing else!). 
		
		Kind regards, 
		
		Michaël Kummert 
		
		

	Dear Michaël,
	today it's difficult to find CVF6.6B to upgrade  6.6.0 version
	Are the problems solved with 6.6C3 that can be found on HP website?
	
	Thank you.
	
	
	-- 
	
	
	Laurent SERRES

	IUT Génie Civil

	3, Rue du Clos Courtel

	BP 90422

	35704 RENNES CEDEX 7 FRANCE

	Tel: (33) 2 23 23 42 02

	Fax: (33) 2 23 23 40 51

	mèl: laurent.serres at univ-rennes1.fr

	web: http://perso.univ-rennes1.fr/laurent.serres