[TRNSYS-users] Unable to use utility subroutines

[David Bradley]

Chun Kwong,
   I am assuming that the access violation is a run time (not a 
compiling) error. I ran into something recently where I was sending 
an argument to a subroutine as:

CALL MySubroutine(Arg1,0.0,ResultVar)

and got an access violation. It seems obvious in hindsight but what I 
needed to do was:

Arg2 = 0.0
CALL MySubroutine(Arg1,Arg2,ResultVar)

in order to avoid the error.
Cheers,
  David


At 20:31 2/5/2008, h8304506 at hkusua.hku.hk wrote:
>Dear Trnsys users.
>
>I am trying use the utility subroutine "Pyschrometrics" in my own
>component.  However, an "access violation" error was found.  I have
>already included the statements "Use TrnsysConstants" and "Use
>TrnsysFunctions" in my source code.  Is there anything more that I
>have to add in order to use the utility subroutines.  Your reply will
>be highly appreciated.  Thank you!
>
>Best Regards
>LEE, Chun Kwong
>PhD student
>Department of Mechanical Engineering
>University of Hong Kong
>
>
>
>
>_______________________________________________
>TRNSYS-users mailing list
>TRNSYS-users at engr.wisc.edu
>https://www.cae.wisc.edu/mailman/listinfo/trnsys-users

****************************************************************************************
Thermal Energy System Specialists (TESS), LLC
David BRADLEY                           2916 Marketplace Drive - Suite 104
Partner                                        Madison, WI 53719
Phone: (608) 274-2577 USA
Fax: (608) 278-1475
E-mail: bradley at tess-inc.com
Web Pages:  http://www.tess-inc.com     and      http://www.trnsys.com

"Providing software solutions for today's energy engineering projects"
****************************************************************************************