[TRNSYS-users] Using batteries in connection with PV panels

[David Bradley]

Chun Kwong,
I would recommend using the Type185 (with gassing effects) battery model
as opposed to the Type47 battery model. The parameters of the Type185
battery, while a bit difficult to figure out at first, can usually be
found from manufacturer's spec sheets online.
Kind regards,
David


a8304506 at graduate.hku.hk wrote:
> Hello, Trnsys users.
>
> I am simulating a system which use PV panels (Type94) to generate electricity to
> drive a compressor.  I intend to use batteries (Type47) to store the electric
> power from the PV panels when the compressor is switched off.  Can anyone
> advise how I can make the connection, as I also want to use the stored energy
> in the batteries when the supply from the PV panels is not sufficient.  Thank
> you!
>
> Best Regards
> LEE, Chun Kwong
> Research assistant
> Division of Building Science and Technology
> City University of Hong Kong
>
>
>
>
>   
> ------------------------------------------------------------------------
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>   

-- 
***********************************************************************
Thermal Energy System Specialists (TESS), LLC 
David BRADLEY                      22 N. Carroll Street - Suite 370 
Partner                            Madison, WI 53703 
                                   USA
P: +1.608.274.2577 
F: +1.608.278.1475
E-mail: bradley at tess-inc.com 
Web Pages:  http://www.tess-inc.com    and      http://www.trnsys.com

***********************************************************************

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20081230/75ac6909/attachment-0005.htm>