[TRNSYS-users] comparing TRNSYS with other building simulation

[Mirjam Peters]

Hi TRNSYS-users,

I am trying to simulate a simple office room in Simulation Studio and TRNBuild and to compare the results with another building simulation program. I've checked all inputs (like climate, ventilation, internal gains etc.) and these are the same in both simulations. However, with everything I try, there is a significant difference in room air temperature of the two simulations. The TRNSYS air temperature is always several degrees higher than the air temperature in my other model, but the temperature graph shows the same course (it seems to be just shifted up)!

Does anyone has come across the same problem? And/or has someone any ideas on how to check what can be the difference in inputs/both simulations?
Could it be an idea to use a single zone building model instead of type 56 for my single room simulation?

Thanks in advance.

With kind regards,

M.A.E. (Mirjam) Peters Msc
Technical specialist Building Physics

DGMR Bouw B.V.
Van Pallandtstraat 9-11
P.O. Box 153
NL-6800 AD  ARNHEM
The Netherlands

T  +31 26 351 21 41
F  +31 26 443 58 36
E  mpe at dgmr.nl
I  http://www.dgmr.nl

DGMR. More than just a solution.
Consultants for construction, industry, traffic, environment and software



________________________________
Onze disclaimer vindt u op http://www.dgmr.nl/disclaimer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20080811/642727c9/attachment-0005.htm>