[TRNSYS-users] Fan Coil

[knut.erik.enerstvedt at niva.no]

Thomas,

To simulate a fan-coil, you can use either a cooling coil or a heating coil
(depending on whether you want to cool or warm the air) connected to a fan
component and a pump component. In the standard TRNSYS HVAC library, there
is a detailed and a simplified cooling coil to choose from. In the TESS
HVAC library, there are several models of both cooling and heating coils.

Hope this was helpful.,

Kind regards,
Knut Erik Enerstvedt




                                                                           
             trnsys-users-requ                                             
             est at engr.wisc.edu                                             
                                                                        To 
             08/05/2008 07:03          trnsys-users at engr.wisc.edu          
             PM                                                         cc 
                                                                           
                                                                   Subject 
             Please respond to         TRNSYS-users Digest, Vol 44, Issue  
             trnsys-users at engr         5                                   
                 .wisc.edu                                                 
                                                                           
                                                                           
                                                                           
                                                                           
                                                                           






----- Message from Thomas Kaschub <thomas.kaschub at web.de> on Mon, 4 Aug
2008 18:49:14 +0200 -----
                                                                           
                To: trnsys-users at engr.wisc.edu                             
                                                                           
           Subject: [TRNSYS-users] Fan Coil                                
                                                                           

Dear TRNSYS users,

is there a TRNSYS 16 Type simulating a fan-coil?
In the standard library I can't find any. I do not have the TESS HVAC
library (yet) and therefore I'm not sure about an appropriate type
herein. Also in the archive of this list I cannot find any clear
statement.
Ideally I need a Type with input and output conditions of the fluid flow
and the air flow to connect it with Type107 and Type56a and values of
the integrated fan.
Thanks for your answers in advance.

Best regards,
Thomas Kaschub







----------------------------------------------------------------------------------------------------------------------
NIVAs hovedkontor har flyttet til nye lokaler i CIENS - Forskningssenter
for miljø og samfunn; Gaustadalléen 21, 0349 Oslo. Meld deg på vårt
nyhetsbrev på www.niva.no