[TRNSYS-users] Creating weather data from a CSV into a .tm2 file

[David Bradley]

Matt,
I'd suggest using Type9 (the generic data reader) which you'll find in 
the Utility directory in Studio. It would be easiest if you stripped the 
two time-stamp columns out of your *.csv file and saved it as a tab 
delimited text file with only numeric columns. However, you don't have 
to strip out those two columns, you can instead use a Formatted read 
statement in Type9.
Kind regards,
David


Matt Fung wrote:
>
> I was wondering if anyone knew how to input weather data from a .csv 
> file into the .tm2 weather files used by TRNSYS. Thanks!
>
> *Matt Fung*
>
> /Associate Engineer/
>
> <http://www.consol.ws/>
>
> 7407 Tam O’Shanter Drive
>
> Stockton, CA 95210-3370
>
> Phone: 209.473.5000 / Fax: 209.474.0817
>
> MFung at ConSol.ws <mailto:MFung at ConSol.ws>
>
> www.ConSol.ws <http://www.consol.ws/>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at engr.wisc.edu
> https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
>   

-- 
***********************************************************************
Thermal Energy System Specialists (TESS), LLC 
David BRADLEY                      2916 Marketplace Drive - Suite 104 
Partner                            Madison, WI 53719 
                                   USA
P: +1.608.274.2577 
F: +1.608.278.1475
E-mail: bradley at tess-inc.com 
Web Pages:  http://www.tess-inc.com    and      http://www.trnsys.com

***********************************************************************