[TRNSYS-users] output feedback problem

[Camilo Arias]

Good day, i have the fallows questions:
 
 I like feedback an output like a input in the next simulation hour, to do this i connect an output variable to first element in the simulation (control card order), i like know first, if can i do this?. If not is possible how can i feedback an output in the "t" time like input in the "t+1" time. 
 
 I attach a project image, the question is refer to the red connection, i have some problems in the result of this, for example i hope that the temperature grow up whit the time to the limits  (because i no have load  all hours to cooler the work fluid), but the output show that always the auxiliar heat take the inlet temperature reference.
 

Thank all

Camilo Arias




      ____________________________________________________________________________________
¡Capacidad ilimitada de almacenamiento en tu correo!
No te preocupes más por el espacio de tu cuenta con Correo Yahoo!:                      
http://correo.espanol.yahoo.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20080407/13dafa43/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Imagen1.png
Type: image/png
Size: 37040 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20080407/13dafa43/attachment-0005.png>