[TRNSYS-users] Error when using EnergyPlus weather data

[Technical Support]

Matt,
  Check the weather directory where you have the
EnergyPlus weather file stored and make sure that there is not a
duplicate of the file with a 0 KB size. Unfortunately, when a Fortran
based program tries to open a file that does not exist, it creates a
blank one. Then, when you try to run the program again, it finds the
empty file that it created the last time it ran. If that doesn't solve
the problem, then please send me the *.tpf that you are running as well and I will see if I can duplicate the error.
Kind regards,
 David





Technical Support TeamThermal Energy System Specialists, LLC2916 Marketplace Dr, Suite 104Madison, WI 53719techsupport at tess-inc.com

----- Original Message -----

Subject: [TRNSYS-users] Error when using EnergyPlus weather data

From: "Matt Fung" >;MFung at ConSol.ws>

Date: Mon, April 21, 2008 10:58







I receive this error when I try using a Type89e and f with the
attached EnergyPlus weather data.  What is causing this error?
 


 
Matt Fung
Associate Engineer


7407 Tam O’Shanter Drive
Stockton, CA 95210-3370
Phone:
209.473.5000 / Fax: 209.474.0817
MFung at ConSol.ws
www.ConSol.ws
    

_______________________________________________TRNSYS-users mailing listTRNSYS-users at engr.wisc.edu
https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20080421/4c5148d5/attachment-0001.htm>