[TRNSYS-users] using storage c++ type
Wouter Lumen
wouter.lumen at ugent.be
Sat Apr 19 10:50:13 PDT 2008
Dear trnsys users,
I'm having some troubles with using storage in my new c++ component.
Every time i run the component i get a "invalid floating point error".
I've have read about the possible causes of this error and i have narrowed
it down to a problem with storage.
I have attached a very simple sourcecode:
It reads in 2 numbers (getal1 and getal2) and puts them back out after adding
a constant to them (in this case, double a and double b).
When i run this component and use hard coded values, such as 1 and 2
for a and b, the
component works flawless.
But when i use storage (as in the attached file), i get the error.
The storage is used in the following way:
Every timestep "1" is added to the stored variables.
So basically, now I add a larger, with timestep increasing, value to getal1
and getal2.
I have tried severall configurations when using the storage such as:
not using the info[12]>0 manipulations,
not using the setstorage at the end of the calculations,
using them both, etc etc...
Maybe the problem is in this, may be not...
Another possible cause (which i think is more likely), is that it has
something
to do with the pointerconstruction for "nitems":
int nitems=2;
int* pitems=&nitems;
double stored[2]={0,0};
so that pitems points to nitems.
This is done because the storage functions take an int* as argument
and not an int.
If anybody has any suggestions on what the problem could be, or could modify
the sourcefile in a way that it should work. Please let me know.
Thank you very much.
Kind regards,
Wouter Lumen.
-------------- next part --------------
#include <cmath>
#include <fstream>
#include "TRNSYS.h" //TRNSYS acess functions (allow to acess TIME etc.)
//************************************************************************
// Object: type154
// IISiBat Model: type154
//
// Author:
// Editor:
// Date: April 19, 2008 last modified: April 19, 2008
//
//
// ***
// *** Model Parameters
// ***
// kaf - [-Inf;+Inf]
// ***
// *** Model Inputs
// ***
// getal1 - [-Inf;+Inf]
// getal2 - [-Inf;+Inf]
// ***
// *** Model Outputs
// ***
// uit1 - [-Inf;+Inf]
// uit2 - [-Inf;+Inf]
// ***
// *** Model Derivatives
// ***
// (Comments and routine interface generated by TRNSYS Studio)
//************************************************************************
//
extern "C" __declspec(dllexport)
int TYPE154 (
double &time, // the simulation time
double xin[], // the array containing the component InpUTS
double xout[], // the array which the component fills with its appropriate OUTPUTS
double &t, // the array containing the dependent variables for which the derivatives are evaluated
double &dtdt, // the array containing the derivatives of T which are evaluated
double par[], // the array containing the PARAMETERS of the component
int info[], // the information array described in Section 3.3.3 of the manual
int icntrl // the control array described in Section 3.3.4 of the manual
)
{
//*************************************************************************
//*** TYPE implementation
//*** This function will be called by TRNSYS
//*** - once at the beginning of the simulation for initialization
//*** - once at the beginning of every timestep for initialization
//*** - once for each iteration of the TRNSYS solver
//*** - once at the end of each timestep for cleanup
//*** - once at the end of the simulation for cleanup
//*************************************************************************
//
//***
//*** WARNING: explanations in the TRNSYS manual use FORTRAN conventions for
//*** array indices. Subtract 1 to obtain 0-based C or C++ conventions.
//*** Example:
//*** TRNSYS manual: info(6) = number of OUTPUTS
//*** -> write no = info[5] to obtain number of outputs in C or C++
//***
//*** We also spell variables in lower case according to C tradition, while they
//*** are spelled in uppercase in the TRNSYS manual (according to FORTRAN tradition)
//***
//-----------------------------------------------------------------------------------------------------------------------
//-----------------------------------------------------------------------------------------------------------------------
// *** STANDARD TRNSYS DECLARATIONS
int npar= 1; // number of parameters we expect
int nin= 2; // number of inputs
int nout=2; // number of outputs
int nder=0; // number of derivatives
int iunit; // UNIT number ('serial number' of the component, from the input file (the 'deck')
int itype; // TYPE number (component number)
// read context information from TRNSYS
// (uncomment lines as required)
info[5] = nout; // number of outputs
iunit = info[0]; // UNIT number
itype = info[1]; // TYPE number
//info[2] ; // number of INPUTS specified by the user of the component
//info[3] ; // number of PARAMETERS specified by the user of the component
//info[4] ; // number of DERIVATIVES specified by the user of the component
//info[5] ; // number of OUTPUTS specified by the user of the component
//info[6] ; // number of iterative calls to the UNIT in the current timestep
// -2 = initialization
// -1 = initial call in simulation for this UNIT
// 0 = first call in timestep for this UNIT.
// 1 = second call in timestep for this UNIT, etc.
//info(7) ; // total number of calls to the UNIT in the simulation
// *** inform TRNSYS about properties of this type
info[8] = 1; // indicates whether TYPE depends on the passage of time: 0=no
info[9] = 0; // use to allocate storage (see Section 3.5 of the TRNSYS manual): 0 = none
// info[10]; // indicates number of discrete control variables (see Section 3.3.4 of the TRNSYS manual)
//-----------------------------------------------------------------------------------------------------------------------
//-----------------------------------------------------------------------------------------------------------------------
// ADD DECLARATIONS AND DEFINITIONS FOR THE USER-VARIABLES HERE
int nitems=2;
int* pitems=&nitems;
double stored[2]={0,0};
//-----------------------------------------------------------------------------------------------------------------------
// PARAMETERS
double kaf;
// INPUTS
double getal1;
double getal2;
//-----------------------------------------------------------------------------------------------------------------------
// READ IN THE VALUES OF THE PARAMETERS IN SEQUENTIAL ORDER
kaf=par[0];
//-----------------------------------------------------------------------------------------------------------------------
// RETRIEVE THE CURRENT VALUES OF THE INPUTS TO THIS MODEL FROM THE XIN ARRAY IN SEQUENTIAL ORDER
getal1=xin[0];
getal2=xin[1];
iunit=info[0];
itype=info[1];
//-----------------------------------------------------------------------------------------------------------------------
// SET THE VERSION INFORMATION FOR TRNSYS
if (info[6]== -2)
{
info[11]=16;
// add additional initialisation code here, if any
return 1;
}
//-----------------------------------------------------------------------------------------------------------------------
//-----------------------------------------------------------------------------------------------------------------------
// DO ALL THE VERY LAST CALL OF THE SIMULATION MANIPULATIONS HERE
if (info[7]== -1)
return 1;
//-----------------------------------------------------------------------------------------------------------------------
//-----------------------------------------------------------------------------------------------------------------------
// PERFORM ANY 'AFTER-ITERATION' MANIPULATIONS THAT ARE REQUIRED HERE
// e.g. save variables to storage array for the next timestep
if (info[12]>0)
{
getStorageVars(stored,pitems,info);
stored[0]=+1;
stored[1]=+1;
setStorageVars(stored,pitems,info);
return 1;
}
//-----------------------------------------------------------------------------------------------------------------------
//-----------------------------------------------------------------------------------------------------------------------
// DO ALL THE VERY FIRST CALL OF THE SIMULATION MANIPULATIONS HERE
if (info[6]== -1) // first call of this component in the simulation
{
// SET SOME INFO ARRAY VARIABLES TO TELL THE TRNSYS ENGINE HOW THIS TYPE IS TO WORK
info[5]=nout;
info[8]=1;
info[9]=1; // STORAGE FOR VERSION 16 HAS BEEN CHANGED
// SET THE REQUIRED NUMBER OF INPUTS, PARAMETERS AND DERIVATIVES THAT THE USER SHOULD SUPPLY IN THE INPUT FILE
// IN SOME CASES, THE NUMBER OF VARIABLES MAY DEPEND ON THE VALUE OF PARAMETERS TO THIS MODEL....
nin=2;
npar=1;
nder=0;
// CALL THE TYPE CHECK SUBROUTINE TO COMPARE WHAT THIS COMPONENT REQUIRES TO WHAT IS SUPPLIED IN
// THE TRNSYS INPUT FILE
int dummy=1;
TYPECK(&dummy,info,&nin,&npar,&nder);
// SET THE NUMBER OF STORAGE SPOTS NEEDED FOR THIS COMPONENT
setStorageSize(pitems,info);
// RETURN TO THE CALLING PROGRAM
return 1;
}
//-----------------------------------------------------------------------------------------------------------------------
// DO ALL OF THE INITIAL TIMESTEP MANIPULATIONS HERE - THERE ARE NO ITERATIONS AT THE INTIAL TIME
if (time < (getSimulationStartTime() +
getSimulationTimeStep()/2.0))
{
// SET THE UNIT NUMBER FOR FUTURE CALLS
iunit=info[0];
itype=info[1];
// CHECK THE PARAMETERS FOR PROBLEMS AND RETURN FROM THE SUBROUTINE IF AN ERROR IS FOUND
// if(...) TYPECK(-4,INFO,0,"BAD PARAMETER #",0)
// PERFORM ANY REQUIRED CALCULATIONS TO SET THE INITIAL VALUES OF THE OUTPUTS HERE
// uit1
xout[0]=1;
// uit2
xout[1]=2;
// PERFORM ANY REQUIRED CALCULATIONS TO SET THE INITIAL STORAGE VARIABLES HERE
stored[0]=1; stored[1]=4;
// PUT THE STORED ARRAY IN THE GLOBAL STORED ARRAY
setStorageVars(stored,pitems,info);
// RETURN TO THE CALLING PROGRAM
return 1;
}
//-----------------------------------------------------------------------------------------------------------------------
//-----------------------------------------------------------------------------------------------------------------------
// *** ITS AN ITERATIVE CALL TO THIS COMPONENT ***
//-----------------------------------------------------------------------------------------------------------------------
//-----------------------------------------------------------------------------------------------------------------------
// RETRIEVE THE VALUES IN THE STORAGE ARRAY FOR THIS ITERATION
getStorageVars(stored,pitems,info);
//-----------------------------------------------------------------------------------------------------------------------
//-----------------------------------------------------------------------------------------------------------------------
// CHECK THE INPUTS FOR PROBLEMS
// if(...) TYPECK(-3,INFO,'BAD INPUT #',0,0)
// if(IERROR.GT.0) RETURN 1
//-----------------------------------------------------------------------------------------------------------------------
//-----------------------------------------------------------------------------------------------------------------------
// *** PERFORM ALL THE CALCULATION HERE FOR THIS MODEL. ***
//-----------------------------------------------------------------------------------------------------------------------
// ADD YOUR COMPONENT EQUATIONS HERE; BASICALLY THE EQUATIONS THAT WILL
// CALCULATE THE OUTPUTS BASED ON THE PARAMETERS AND THE INPUTS. REFER TO
// CHAPTER 3 OF THE TRNSYS VOLUME 1 MANUAL FOR DETAILED INFORMATION ON
// WRITING TRNSYS COMPONENTS.
double a = stored[0];
double b = stored[1];
for(int i=0;i<5;i++)
{
getal1= getal1 + stored[0];
getal2= getal2 + stored[1];
}
//-----------------------------------------------------------------------------------------------------------------------
// SET THE OUTPUTS FROM THIS MODEL IN SEQUENTIAL ORDER AND GET OUT
// uit1
xout[0]=getal1;
// uit2
xout[1]=getal2;
//-----------------------------------------------------------------------------------------------------------------------
//-----------------------------------------------------------------------------------------------------------------------
//-----------------------------------------------------------------------------------------------------------------------
//-----------------------------------------------------------------------------------------------------------------------
// SET THE STORAGE ARRAY AT THE END OF THIS ITERATION IF NECESSARY
// stored[0]=+1;
// stored[1]=+1;
setStorageVars(stored,pitems,info);
//-----------------------------------------------------------------------------------------------------------------------
//-----------------------------------------------------------------------------------------------------------------------
// REPORT ANY PROBLEMS THAT HAVE BEEN FOUND USING CALLS LIKE THIS:
// MESSAGES(-1,'put your message here','MESSAGE',IUNIT,ITYPE)
// MESSAGES(-1,'put your message here','WARNING',IUNIT,ITYPE)
// MESSAGES(-1,'put your message here','SEVERE',IUNIT,ITYPE)
// MESSAGES(-1,'put your message here','FATAL',IUNIT,ITYPE)
//-----------------------------------------------------------------------------------------------------------------------
// EVERYTHING IS DONE - RETURN FROM THIS SUBROUTINE AND MOVE ON
return 1;
}
//-----------------------------------------------------------------------------------------------------------------------
More information about the TRNSYS-users
mailing list