[TRNSYS-users] WG: Active layer for a wall

hotline hotline at transsolar.com
Wed Sep 5 02:04:55 PDT 2007


Dear Fuqiao,
 
The active layers are desinged to be used with water. You may change the specific heat coefficient,
but the decision of laminar/turbulent flow is based on the dynamic viscosity of water and the convective
heat transfer coeffcients from fluid to the pipe wall is based on water.
 
Thus, if you change the most important property, specific heat coefficient, and the fluid properties are 
similar to water the resulting error shouldn't be too large. 
 
 
Regards,
 
Marion
 
Dipl.-Ing. Marion Hiller 
TRANSSOLAR Energietechnik GmbH 
Munich - New York - Stuttgart + 49.711.67976.0 

KlimaEngineering- Technologien für energieeffizientes Bauen und Nutzerkomfort in Gebäuden 
Transsolar Energietechnik GmbH, Curiestrasse 2, 70563 Stuttgart / Amtsgericht Stuttgart - HRB 23347 / USt-IdNr.: 99073/00911 
Geschäftsführer: Dipl.Ing. Matthias Schuler, Dipl.Ing. Thomas Auer, Dipl.Phys. Stefan Holst 


	 
	 
	-----Ursprüngliche Nachricht-----
	Von: Fuqiao.Wang at fulcrumfirst.com [mailto:Fuqiao.Wang at fulcrumfirst.com] 
	Gesendet: Dienstag, 4. September 2007 12:06
	An: trnsys-users at engr.wisc.edu
	Betreff: [TRNSYS-users] Active layer for a wall
	
	




	Dear all 

	Is there any way we can change the fluid properties of passing through the active layer in TYPE56? Currently default water as working fluid however you can change the specific capacity but no way to change its density, and thermal conductivity. 

	Any help? 

	Thank you in advance. 

	Fuqiao Wang 
	Sustainable Consulting Engineer 
	FULCRUM CONSULTING 
	London:         Tel: +44 (0)20 7520 1300/1305   
	Edinburgh:      Tel: +44 (0)131 226 0220        
	Spain:          Tel: +34 98 5195989 
	mailto:Fuqiao.Wang at fulcrumfirst.com <mailto:Fuqiao.Wang at fulcrumfirst.com>      
	www.fulcrumfirst.com <file://www.fulcrumfirst.com>      

	Fulcrum Consulting is proud to be a Founding Member of the UK Green Building Council. To find out more visit http://www.ukgbc.org

	******************* email confidentiality notice *************************


	This message is intended for the addressee recipient only. It is private and confidential. If you have received this message in error, please notify the sender immediately and remove it from your system. If you are not the intended recipient you must not use, disclose, distribute, copy, print or rely on this email. Fulcrum First Ltd Incorporated in England and Wales with Registered Number: 03401753. Registered Office: 62-68 Rosebery Avenue, London EC1R 4RR


	************* Fulcrum First Ltd trading as Fulcrum Consulting ************* 



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20070905/4765fca0/attachment-0005.htm>


More information about the TRNSYS-users mailing list