[TRNSYS-users] Active layer for a wall

[Fuqiao.Wang at fulcrumfirst.com]

Dear all

Is there any way we can change the fluid properties of passing through
the active layer in TYPE56? Currently default water as working fluid
however you can change the specific capacity but no way to change its
density, and thermal conductivity. 

Any help?

Thank you in advance.

Fuqiao Wang
Sustainable Consulting Engineer
FULCRUM CONSULTING
London:		Tel: +44 (0)20 7520 1300/1305	
Edinburgh:	Tel: +44 (0)131 226 0220	
Spain:		Tel: +34 98 5195989
mailto:Fuqiao.Wang at fulcrumfirst.com	
www.fulcrumfirst.com	 
Fulcrum Consulting is proud to be a Founding Member of the
UK Green Building Council.  
To find out more visit  http://www.ukgbc.org

******************* email confidentiality notice *************************

This message is intended for the addressee recipient only. 
It is private and confidential. If you have received this message 
in error, please notify the sender immediately and remove it from
your system. If you are not the intended recipient you must not 
use, disclose, distribute, copy, print or rely on this email. 

Fulcrum First Ltd Incorporated in England and Wales with 
Registered Number: 03401753. 
Registered Office: 62-68 Rosebery Avenue, London EC1R 4RR

************* Fulcrum First Ltd trading as Fulcrum Consulting *************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20070904/1b2076da/attachment-0005.htm>