[TRNSYS-users] long time simulation

Diego A. Arias daarias at wisc.edu
Wed May 23 07:47:40 PDT 2007


Hi Hermann,

If you have a building in your simulation it can only simulate up to 5 
years.
Sorry for this inconvenience. We have added this to the list of future 
enhancements.
Best regards,

Diego

Hermann Schranzhofer wrote:
> Hi,
>
> we tested long time simulation with TRNSYS 16.1 and found that it is not possible to run a simulation for more than 5 years. Has someone an idea why this is limited?
>
> Thanks for answers.
>
> Best regards
> Hermann.
>
> _______________________________________________________________
>
>  DI Dr. mont. Hermann Schranzhofer
>  Institut fuer Waermetechnik / Institute of Thermal Engineering
>  TU Graz / Graz University of Technology  	
>  Inffeldgasse 25 / B, A-8010 Graz	
>  
>  Tel.: +43 316 873 7314
>  Fax : +43 316 873 7305
>  http://www.iwt.tugraz.at/
> _______________________________________________________________
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at engr.wisc.edu
> https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
>   


-- 
Diego A. Arias
TRNSYS Coordinator
Solar Energy Laboratory
University of Wisconsin - Madison
1500 Engineering Drive
Madison, WI 53706



More information about the TRNSYS-users mailing list