[TRNSYS-users] Problem of convergence

[Chehal, Samir]

Dear trnsys users,

I have a problem of convergence.
I modified convergence parameters in control card, but there is one error and
I don't know why.


 <<Wizard25.tpf>>  <<Wizard25.bui>> 
The error message is :

 *** Fatal Error at time   :      3287.000000
    Generated by Unit     : Not applicable or not available
    Generated by Type     : Not applicable or not available
    TRNSYS Message    203 : A convergence problem was encountered.
Modification of the TOLERANCES control card may cure the problem
    Reported information  : Not available


Best regards
=========================================================

NOTICE - This communication may contain confidential and privileged 
information that is for the sole use of the intended recipient. Any viewing,
copying or distribution of, or reliance on this message by unintended
recipients is strictly prohibited. If you have received this message in
error, please notify us immediately by replying to the message and deleting
it from your computer.

=========================================================
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20070518/980e5519/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Wizard25.tpf
Type: application/octet-stream
Size: 321007 bytes
Desc: Wizard25.tpf
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20070518/980e5519/attachment-0010.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Wizard25.bui
Type: application/octet-stream
Size: 85093 bytes
Desc: Wizard25.bui
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20070518/980e5519/attachment-0011.obj>