[TRNSYS-users] Help

Samuele ozzysam at hotmail.com
Mon May 14 01:51:43 PDT 2007


Dear Trnsys users,

I have to model the same problem presented in Trnsys' Help - 05 Component Mathematical reference pg. 197 ( see the image enclosed ) - due to the fact I have to mix 
heated fluid with colder supply fluid so that the flow stream to the load is no hotter than necessary.
Th and Ti are rispectively the outputs from the storage tank and the load: I need to build something which calculates the flow rates m_1 and m_2, step by step, so that:
                         

                                      - T_load = 240°C              ( temperature to load )
                                      
                                      - m_i = 15000 kg/hr          ( flow rate to load )

I really need an help: could anybody tell me how can I do, which types and controller ( connections)  I have to use ?

Thanks in advance,
                               Samuele.










-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20070514/a75081fe/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Image.doc
Type: application/msword
Size: 30208 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20070514/a75081fe/attachment-0005.doc>


More information about the TRNSYS-users mailing list