[TRNSYS-users] Re : Re : About Shading masks (type 67) and Overhang and wingwalls shading (type 34)
Fabien Morice
fabien.morice at yahoo.fr
Tue Mar 20 08:27:56 PDT 2007
Thank you, Diego
I'm interresting by the case 2 : shading from far away objects, overhangs ang wingwalls.
I think you have forgotten to describe connections between the type 109 and the type 67
I explain you :
You give me 3 connections
I'm agree with you for the 2 first but I don't know where have you found the input " incidence angle of direct radiation" in type 67
In more, I think there are more connections than 3 !
More far, you give me the same connections between (the type 109 and the type 67) and (the type 67 and the type 34)
I suppose you have use Copy/Paste.
Can you have a look ?
I'm interresting by details about connections between (the type 109 and the type 67)
(the type 34 and the type 56a)
(the type 109 and the type 34)
Thank you in advance.
Thank you again because thanks to you I have discover a new type (57 = unit conversion routine).
I suppose you use it to convert pressure [Pa] in [atm].
Isn't it?
Fabien Morice.
----- Message d'origine ----
De : Diego A. Arias <daarias at wisc.edu>
À : Fabien Morice <fabien.morice at yahoo.fr>
Cc : trnsys-users at engr.wisc.edu
Envoyé le : Lundi, 19 Mars 2007, 22h21mn 45s
Objet : Re: [TRNSYS-users] Re : About Shading masks (type 67) and Overhang and wingwalls shading (type 34)
Dear Morice,
I prepared a tutorial on how to connect Type67, 34 and 56.
Go to
http://sel.me.wisc.edu/trnsys/downloads/tutorials_and_examples/connecting34_67.pdf
Please let me know if you have comments about the tutorial.
Best regards,
Diego
Fabien Morice wrote:
> Thanks Diego
> But could you tell me more ?
> How can I connect the type 67 with the type 56a ? (Which output)
> And if I want tu use type 67, type 56a and type 34 ?
> Have you an example for me ?
>
> Fabien Morice
>
>
> ----- Message d'origine ----
> De : Diego A. Arias <daarias at wisc.edu>
> À : Fabien Morice <fabien.morice at yahoo.fr>
> Cc : trnsys-users at engr.wisc.edu
> Envoyé le : Vendredi, 9 Mars 2007, 17h17mn 11s
> Objet : Re: [TRNSYS-users] About Shading masks (type 67) and Overhang
> and wingwalls shading (type 34)
>
> Hi Fabien,
>
> You do not need to use Type34 in combination with Type67. Type 67 was
> created to avoid the problem that you found in the mailing list: having
> to use two instances of Type 68. My answer to Amelie was before Type67
> was available.
> Best regards,
>
> Diego
>
>
> Fabien Morice wrote:
> > Dear TRNSYS users, I have some questions for you :
> >
> > 1°) I try to use the type 67 with the type 56a (Multizone Building).
> > But, it seems to me that I *_must_* used the type 34 in
> > complement.
> > [Output 11 of type 34 (Fraction of solar shading) ---> Input
> > of type 56a (created by me to used in Input of External Shading Factor)]
> > because the type 67 gives me 2 outputs (among 11) :
> > [Output 7 of type 67 (Fraction of beam visible on horizontal
> > for mask) ---> ?
> > [Output 9 of type 67 (Fraction of diffuse visible on
> > horizontal for mask) ---> ?
> > that I don't know used with the type 56a directly.
> > 2°) I have read the files of the forum and I try the solution
> > proposed by Diego (Wed Oct 26 2005) to Amelie Mariller
> > who recommend to use two type 68 (one horizontal and one
> > vertical) with each type 34.
> > So, I have created two files in ".dat" :
> > the first with a slope of 0°
> > and the second with a slope of 90°.
> > The two files dividing the same others informations.
> > But I have the message : Error "Unable to read mask file,
> > please check file syntax and format." when I launch the calculs.
> >
> > 3°) So, I use only one type 68 with one type 34 :
> >
> > [Output 3 of type 67 Shaded beam radiation for surface --->
> > Input 5 of type 34 (Beam radiation on surface)]
> > [Output 10 of type 67 Shaded diffuse radiation on horizontal
> > for mask ---> Input 4 of type 34 (Horizontal diffuse radiation)]
> > [Output 11 of type 67 Shaded total radiation on horizontal for
> > mask ---> Input 3 of type 34 (Total horizontal radiation)]
> >
> > Parameter 1 of type 34 Upstream component mode = 1 and not 0
> >
> > In more, I use two Equations :
> >
> > a) Equation 1 :
> >
> > Sky diffuse radiation on titled surface i (Output of
> > type 109)
> > +
> > Groung reflected diffuse radiation on titled surface i
> > (Output of type 109)
> > =
> > Diffuse radiation for opening (Input 6 of type 67)
> >
> > b) Equation 2 :
> >
> > Sky diffuse radiation on horizontal
> > +
> > Groung reflected diffuse radiation on horizontal
> > =
> > Diffuse radiation on horizontal (Input 4 of type 69b
> > and Input 4 of type 67)
> >
> > After simulation, I have controlled the five View factor
> > (Outputs 6,7,8,9,10 of type 34) by Online plotter (type 65d)
> > and I'm surprise because the sum is not equal to 1 !
> > But if I change :
> > Parameter 1 of type 34 Upstream component mode = 0 and not 1
> > the sum is correct.
> >
> > * Anyone knows what I should do? Thanks.*
> > **
> > *Fabien Morice.*
> >
> > ------------------------------------------------------------------------
> > Découvrez une nouvelle façon d'obtenir des réponses à toutes vos
> > questions ! Profitez des connaissances, des opinions et des
> > expériences des internautes sur Yahoo! Questions/Réponses
> > <http://fr.rd.yahoo.com/evt=42054/*http://fr.answers.yahoo.com>.
> > ------------------------------------------------------------------------
> >
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > TRNSYS-users mailing list
> > TRNSYS-users at engr.wisc.edu
> > https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
> >
>
>
> --
> Diego A. Arias
> TRNSYS Coordinator
> Solar Energy Laboratory
> University of Wisconsin - Madison
> 1500 Engineering Drive
> Madison, WI 53706
>
>
> ------------------------------------------------------------------------
> Découvrez une nouvelle façon d'obtenir des réponses à toutes vos
> questions ! Profitez des connaissances, des opinions et des
> expériences des internautes sur Yahoo! Questions/Réponses
> <http://fr.rd.yahoo.com/evt=42054/*http://fr.answers.yahoo.com>.
> ------------------------------------------------------------------------
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at engr.wisc.edu
> https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
>
--
Diego A. Arias
TRNSYS Coordinator
Solar Energy Laboratory
University of Wisconsin - Madison
1500 Engineering Drive
Madison, WI 53706
___________________________________________________________________________
Découvrez une nouvelle façon d'obtenir des réponses à toutes vos questions !
Profitez des connaissances, des opinions et des expériences des internautes sur Yahoo! Questions/Réponses
http://fr.answers.yahoo.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20070320/ca846d06/attachment-0005.htm>
More information about the TRNSYS-users
mailing list