[TRNSYS-users] Include statement

[Diego A. Arias]

Dear Mohammad,

Try replacing the keyword 'constants' with 'equations'.
Please let me know if this works.
Best regards,

Diego


mohammad abdunnabi wrote:
> Dear All;
>
> I've used INCLUDE statement in my Trnedit program, however, I have encoutered some problems and I have some enquiry about it: the first thing that I have used file (e.g file.inc) opend by Notepad. secondly, in the input file, I wrote the following statement
>
> Constants 3
> Dr = X1
> TK = X2
> BTA=X3
>
> where X1,X2 and X3 should be read from the file included in the include statement (file.inc). and the file.inc has the following shape:
>
> X1= 0.005
> X2= 360
> X3= 45
>
> the error statement in the list file is as follows:
> The referenced variable used in this equation has not been defined in the TRNSYS input file. The equation begins with the string in "reported information"
>     Reported information  : DR=X1=
>
> Please, does the procedure I have followed is right or wrong and any help will be appreciated
>
> Thanks in advance
>
> M. Abdunnabi
>
>
>
>  
> ____________________________________________________________________________________
> Need Mail bonding?
> Go to the Yahoo! Mail Q&A for great tips from Yahoo! Answers users.
> http://answers.yahoo.com/dir/?link=list&sid=396546091
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at engr.wisc.edu
> https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
>   


-- 
Diego A. Arias
TRNSYS Coordinator
Solar Energy Laboratory
University of Wisconsin - Madison
1500 Engineering Drive
Madison, WI 53706