[TRNSYS-users] Temperatures of the air crossing in a series ofburied horizontal pipes

[aa1 at brighton.ac.uk]

Hi Mourizio,

You may try Type 460 from Transsolar, it is a comprehensive model for
solving both Sensible and latent heat exchange between soil and air. You
may download the manual from the link below and see if it will be
suitable for your problem.

http://www.transsolar.com/__software/download/en/ts_type_460_en.pdf

Regards
Abdullahi

Abdullahi Ahmed (Postgraduate researcher)
School of the Environment
University of Brighton
Cockcroft Building
Lewes Rd.
Brighton
BN2 4GJ

Tel: +44 01273 643455


-----Original Message-----
From: Maurizio Sorce [mailto:mauriziosorce at dream.unipa.it] 
Sent: 28 June 2007 18:49
To: Mailing list TRNSYS
Subject: [TRNSYS-users] Temperatures of the air crossing in a series
ofburied horizontal pipes

Dear TRNSYS Users,

I need to know the outlet temperatures of the air crossing in a series
of 
buried horizontal pipes. Pipes are buried under an open structure
(pilotis).

I have TRNSYS 16 with TESS libraries. I think that simple ground
temperature 
model (type 501) is not useful. What types can I use?

Thank's in advance.

---------------------------------------------------------------

Eng. Maurizio Sorce

DREAM Department of Energy and Environmental Research
University of Palermo

Viale delle Scienze, Building 9
I-90128 Palermo, Italy (EU)

mauriziosorce at dream.unipa.it
www.dream.unipa.it

Phone: (+39) 091 236012
Mobile phone: (+39) 3495386296
Fax: (+39) 091484425 

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at engr.wisc.edu
https://www.cae.wisc.edu/mailman/listinfo/trnsys-users