[TRNSYS-users] humidifier/dehumidifier

[David Bradley]

Jana,
   When you define a heating or a cooling type inside a zone in 
TRNBuild, it allows you to associate humidification with heating and 
dehumidification with cooling. You can set either limited or 
unlimited capacity and Type56 will automatically hold the humidity 
within the bounds that you specify, reporting latent load in one of 
the NTYPES. You could also use a model of a humidifier or a 
dehumidifier outside of Type56 and set up ventilation stream inputs 
to blow conditioned air into your zones.
Cheers,
David


At 05:02 6/16/2007, JanaSSt wrote:
>Hallo,
>
>I'm simulating a part of an old castle. In this castle, there is a
>museum. I've done my multizonebuilding, but there's one thing missing.
>In this museum there are humidifier and dehumidifier. I don't no how to
>integrate these into my building. Is there a way to do it in type56 or
>is there another type in the simulation studio with which I could
>simulate the humidifier and dehumidifier:
>
>Thanks for your answers.
>
>Jana
>
>_______________________________________________
>TRNSYS-users mailing list
>TRNSYS-users at engr.wisc.edu
>https://www.cae.wisc.edu/mailman/listinfo/trnsys-users

****************************************************************************************
Thermal Energy System Specialists (TESS), LLC
David BRADLEY                           2916 Marketplace Drive - Suite 104
Partner                                        Madison, WI 53719
Phone: (608) 274-2577 USA
Fax: (608) 278-1475
E-mail: bradley at tess-inc.com
Web Pages:  http://www.tess-inc.com     and      http://www.trnsys.com

"Providing software solutions for today's energy engineering projects"
****************************************************************************************