[TRNSYS-users] LINKCK & DYNAMICDATA problem

[Diego A. Arias]

Hi Elisabeth,

The last argument in the call to DynamicData is an alternative return: 
it is a reference to a label in the sourcecode.  The following lines are 
an example from Type67 of how to use DynamicData:

          CALL DYNAMICDATA(LUTMP,2,NX,1,X,Y,INFO,*45)
          CALL LINKCK('TYPE67','DATA',1,99)
          RETURN 1
45        CONTINUE

If DynamicData returns successfully, it goes to label 45.  Otherwise it 
calls LINKCK and returns.
Best regards,

Diego

Elisabeth Aslanian wrote:
> Hello everybody
>
> i am doing a data reader so i use the trnsys funcitions dynamicdata and 
> LINKCK in type i wrote and called type907
> my syntax is so :
> CALL DYNAMICDATA(LU,NX,NVAL,NY,X,Y,INFO)
> CALL LINKCK('TYPE907','DYNAMICDATA',1,907)
> i dont understand why when i rum trnsys i get the following error:
> trnsys message 104: the trnsys processor has reported that a subroutine was 
> called that has not been found in the available TRNSYS libraries
>
> reported infromation : reported by LINKCK
>
>
> thank you for your help,
>
> Elisabeth
>
> _________________________________________________________________
> Avec Windows Live OneCare éliminez tous les virus de votre PC ! 
> http://www.windowslive.fr/liveonecare/default.asp
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at engr.wisc.edu
> https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
>   


-- 
Diego A. Arias
TRNSYS Coordinator
Solar Energy Laboratory
University of Wisconsin - Madison
1500 Engineering Drive
Madison, WI 53706