[TRNSYS-users] TRNSYS and CONTAM

[Ming Li]

Dear TRNSYS users:
 
I am modelling a project about Integration of TRNSYS and CONTAM. In CONTAM ,
I add the HVAC system ( AHS, supply, return). The problem is when I change
the flow rate of supply or return in CONTAM, but the flow rate of TRNSYS
shown by TRNEXE does not change. I cannot figure out this problem.
 
Our help would be greatly appreciated. Thanks in advance.
 
Ming
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20070614/fc542a56/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: BackGrnd2.jpg
Type: image/jpeg
Size: 6562 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20070614/fc542a56/attachment-0001.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: imstp_pets_cat1_en.gif
Type: image/gif
Size: 36179 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20070614/fc542a56/attachment-0001.gif>