[TRNSYS-users] Stability criteria in Type 56b in TRNBuild

[Sakulpipatsin, P.]

Dear the TRNSYS-users,

 

I made a one-zone model with very thick walls by using Type 56b in
TRNBuild. I received a message from TRNBuild that,

"Error creating the wall transfer function coefficients:

Stability criteria not fulfilled

Check layer definition (thickness, ratio of conductivity/density)

Please, check the INF-file for further information."

 

Then I checked the INF-file and found that

"** ERROR - STABILITY CRITERIA FOR WALL TYPE BST_H_EXT   NOT FULLFILLED

 

CHECK LAYER VALUES 

  NO FILE GENERATED **" 

 

Could you please let me know what the stability criteria is and what
alternatives could solve this error? I could not find information
relevant to the problem in the TRNSYS manual. Thank you.

 

Best regards,

 

 

Poppong Sakulpipatsin, MSc.

 

 

 

Doctoral researcher, Building Services 

 

Faculty of Architecture, Delft University of Technology 

 

Berlageweg 1, 2628 CR Delft, The Netherlands 

 

Tel. +31-15-278-5955

 

Fax  +31-15-278-4178 

 

e-mail P.Sakulpipatsin at bk.tudelft.nl 

 

http://bk.tudelft.nl/bt/installaties

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20070730/56109c84/attachment-0005.htm>