[TRNSYS-users] Automatization in running .dck-files

[Diego A. Arias]

Dear Julian,

In TRNSYS16, if you go to the manual Volume 1, section 1.10 'Running 
TRNSYS in batch files or in hidden mode', you will find that it is 
possible to run TRNSYS with additional switches:
c:\TRNSYS16\TrnExe.exe c:\mydeck.dck /n
where /n tells TRNSYS to skip the dialog box at the end of the simulation.
Another swich /h runs TRNSYS in hidden mode.  You need to disable all 
online plotters, setting parameter 9 to -1, if you really want to run in 
hidden mode.

Best regards,

Diego


Julian Demetz wrote:
>
> Dear Trnsys-Users,
>
>  
>
>  
>
> I wrote the following .bat file to automatize my simulations:
>
>  
>
> @echo off
>
>  
>
> E:\TRNSYS\SAHP05_A00_tol050.dck
>
> E:\TRNSYS\SAHP05_A12_tol050.dck
>
> E:\TRNSYS\SAHP05_A16_tol050.dck
>
> E:\TRNSYS\SAHP05_A20_tol050.dck
>
> E:\TRNSYS\SAHP05_A24_tol050.dck
>
>  
>
> end
>
>  
>
> Since there are online plotter declared in my .dck-files at the end of 
> every simulation I still have to click a button with the mouse to exit 
> the online plotter and only then the next simulation starts. Is there 
> an option to automatic close simulation windows in order that the next 
> simulation can start automatically?
>
> Also when I remove the online plotter I have to close an information 
> window at the end of the simulation.
>
>  
>
> Best regards
>
>  
>
> Julian Demetz
>
>  
>
> Universidade Federal de Santa Catarina, Florianópolis, Brazil
>
> Technische Universität München, Munich, Germany
>
>  
>
>  
>
>  
>
>  
>
>  
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at engr.wisc.edu
> https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
>   


-- 
Diego A. Arias
TRNSYS Coordinator
Solar Energy Laboratory
University of Wisconsin - Madison
1500 Engineering Drive
Madison, WI 53706