[TRNSYS-users] hello Trnsys user

[Destin Noa]

HI,
I am modeling a multi-Zone Building  Using Type 56, My building has 6 zones
( C2,D2,E2, and C1,D1,and E1); But  when i did edit the building I had two
error: The stating that: "error in automatic heat transfer calculation for
surface 24 or it adjacent surface! Automatic heat calculation is only
allowed on the surfaces within a zone". I would appreciate any help or
advice how to slove this problem.
Thank you

Destin
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20070721/2aaceff4/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: BuildingProject.tpf
Type: application/octet-stream
Size: 145534 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20070721/2aaceff4/attachment-0010.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: BuildingProject.log
Type: application/octet-stream
Size: 5357 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20070721/2aaceff4/attachment-0011.obj>