[TRNSYS-users] question about stratified storage tank
David Bradley
bradley at tess-inc.com
Thu Jul 5 08:00:20 PDT 2007
Pauline,
>Sorry guyz I have another question.. I noticed that when I am
>plotting the collector tempeeratures, I do not get the oulet
>temperature of the collector, Is there a way I can get the oulet
>temperature of a collector which I'm thinking should be different
>from the outlet temperature of the fluid run through it?
if you are not seeing any temperature difference between the inlet
and outlet of your collector, I would guess that there is a problem
with the connections between your weather data reader and the solar
collector, or that the flow rate of fluid through the collector is set to 0.
>Also I'm getting these kind of message errors when I run my
>simulation, could someone tell what it means and how I can correct it?
>Notice at time : 0.000000
> Generated by Unit : Not applicable or not available
> Generated by Type : Not applicable or not available
> Message : The following Types were loaded from
> TRNDll.dll: Type65, Type15, Type74, Type14, Type114, Type5
this is just telling you from what DLL you are loading certain Types
that are in your simulation. Anything that is labeled "notice" is
merely information that might be useful or interesting. A message
that is labeled "warning" is potentially a problem, especially if it
recurs. A message labeled "fatal" will stop the simulation immediately.
****************************************************************************************
Thermal Energy System Specialists (TESS), LLC
David BRADLEY 2916 Marketplace Drive - Suite 104
Partner Madison, WI 53719
Phone: (608) 274-2577 USA
Fax: (608) 278-1475
E-mail: bradley at tess-inc.com
Web Pages: http://www.tess-inc.com and http://www.trnsys.com
"Providing software solutions for today's energy engineering projects"
****************************************************************************************
More information about the TRNSYS-users
mailing list