[TRNSYS-users] input for parametric simulation

[Diego A. Arias]

Dear Xavier,

TRNEdit has the possibility of pasting the information into the table. 
Crtl+V works, as well as the menu Edit --> Paste.
I just tried copying from Excel and it worked fine.
Best regards,

Diego

FAURE Xavier wrote:
>
> Dear TRNSys users,
>
> Does any one know if it is possible to copy a data file (of any 
> format) to a table for a parametric simulation ?
>
> Let me explain : All the value of the parameters I want to modify at 
> each simulation are in a data file. Can I just copy all the values any 
> paste them to the table file (ctrl C / ctrl V) or do I have to type 
> them all (there are many….)
>
> Regards,
>
> Xavier Faure
>
> CSTB
>
> Enveloppes & Revêtements
>
> Caractérisation Physique des Matériaux
>
> 24 rue Joseph Fourier
>
> 38400 Saint Martin d'Heres
>
> Tel : 33 (0)4 76 76 25 74
>
> Fax : 33 (0)4 76 76 25 60
>
> mail : xavier.faure at cstb.fr <mailto:xavier.faure at cstb.fr>
>
> web : www.cstb.fr <http://www.cstb.fr>
>
> ------------------------------------------------------------------------


-- 
Diego A. Arias
TRNSYS Coordinator
Solar Energy Laboratory
University of Wisconsin - Madison
1500 Engineering Drive
Madison, WI 53706