[TRNSYS-users] Using output of equations as a parameters

[David Bradley]

Mohammad,
   Yes, you simply enter the name of the equation as the parameter value. 
If you are using the TRNSYS Studio you need to change the units of the 
parameter to "string" and then type the name of the equation. If you are 
using TRNEdit, it might look like:

EQUATIONS 1
MyValue = 13

...

UNIT 5 TYPE 718
PARAMETERS 1
MyValue ...

Bear in mind, though that PARAMETER values are read once at the beginning 
of a simulation and are not updated during the simulation. Thus the result 
of your equation may change throughout the simulation but the component 
parameter value will not be updated.

Kind regards,
  David


At 09:17 1/8/2007, mohammad abdunnabi wrote:
>Dear Trnsys users
>
>Is it possible to use the output of equations (the output is calculated 
>from other output compoenets) as a parameters (not input)  in other 
>component in Trnedit. If not, is any way that I can do to use the output 
>of any compenent as a parameter to other components in Trnedit simulation 
>program.
>
>many thinks in advance
>
>M. Abdunnabi
>
>__________________________________________________
>Do You Yahoo!?
>Tired of spam?  Yahoo! Mail has the best spam protection around
>http://mail.yahoo.com
>
>_______________________________________________
>TRNSYS-users mailing list
>TRNSYS-users at engr.wisc.edu
>https://www.cae.wisc.edu/mailman/listinfo/trnsys-users

****************************************************************************************
Thermal Energy System Specialists (TESS), LLC
David BRADLEY                           2916 Marketplace Drive - Suite 104
Partner                                        Madison, WI 53719
Phone: (608) 274-2577 USA
Fax: (608) 278-1475
E-mail: bradley at tess-inc.com
Web Pages:  http://www.tess-inc.com     and      http://www.trnsys.com

"Providing software solutions for today's energy engineering projects"
****************************************************************************************