[TRNSYS-users] RH outputs from the building model

[David Bradley]

Dear Aristotelis,
   In order to get RH outputs from the building, you just click on the 
"outputs" button in the main project window and select the zones for which 
you want to see RH (or any other) output.  I will send you the presentation 
directly.
Cheers,
  David


At 05:47 1/5/2007, Aristotelis Avgelis wrote:
>Dear Mr Bradley,
>
>I have read in a message that you have developed a methodology in order
>to have RH outputs from the building model. I would appreciate very much
>if you could send me too your powerpoint presentation.
>
>Thank you in advance
>
>With regards,
>Aristotelis Avgelis
>
>--
>Avgelis Aristotelis
>Dipl. Mechanical Engineer
>Laboratory of Heat Transfer and
>Environmental Engineering
>Aristotle University Thessaloniki
>Box 483 54124 Thessaloniki, GREECE
>Tel: + 30 2310 996011
>Fax: + 30 2310 996012
>e-mail: aavgelis at aix.meng.auth.gr
>URL: http://aix.meng.auth.gr
>
>_______________________________________________
>TRNSYS-users mailing list
>TRNSYS-users at engr.wisc.edu
>https://www.cae.wisc.edu/mailman/listinfo/trnsys-users

****************************************************************************************
Thermal Energy System Specialists (TESS), LLC
David BRADLEY                           2916 Marketplace Drive - Suite 104
Partner                                        Madison, WI 53719
Phone: (608) 274-2577 USA
Fax: (608) 278-1475
E-mail: bradley at tess-inc.com
Web Pages:  http://www.tess-inc.com     and      http://www.trnsys.com

"Providing software solutions for today's energy engineering projects"
****************************************************************************************