[TRNSYS-users] Help... error in modelling overhang and mask

gizmoog gizmoog at free.fr
Fri Feb 23 04:18:38 PST 2007


dear users,

I try to model a multizone building with overhang and one of my surface 
is almost horizontal and has an overhang but when I run the model, it 
returns me (a lot...) :

*** Warning at time       :      1049.000000
    Generated by Unit     :    56
    Generated by Type     :    56
    Message               : Beam radiation greater than 0 occured for 
an  incident angle of   90.89 greater than 90° for orientation  12. Beam 
radiation has been set to 0.!


I can't find if I did an error.
You'll find attached my model files. Does anybody can help ? (I have to 
finish it this week end...)

best regards,
Gizmoog.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: EHPAD 1.zip
Type: application/x-zip-compressed
Size: 856539 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20070223/0cd6a2af/attachment-0005.bin>


More information about the TRNSYS-users mailing list