[TRNSYS-users] type 34

[Diego A. Arias]

Dear Gilles,

You have to set the azimuth of the surface in Type16 and Type34. Is it 
possible that you forgot to modify one of them?
Regards,

Diego

Gilles Fraisse wrote:
> dear trnsys users
> using type 16 + type 34 , the "direct beam fraction" doesn't change 
> when I change the azimuth of the surface. I calculated (with equation) 
> the direct beam fraction separatly  and it seems to be the values for 
> Azimuth=0.
>
> I must make a mistake, but I don't know where.
> does anybody has an idea ?
> best regards
> G. Fraisse
>
>  
>
>      
>    
>     
> °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°
> LOCIE - groupe DENED (Développement Énergétique Durable)
> Polytech'Savoie - Université de Savoie
> Campus Scientifique Savoie Technolac
> 73376 - Le Bourget du Lac Cedex (France)
> Tel. +33 (0)4.79.75.88.95  (Fax : 81.44)
> °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at engr.wisc.edu
> https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
>   


-- 
Diego A. Arias
TRNSYS Coordinator
Solar Energy Laboratory
University of Wisconsin - Madison
1500 Engineering Drive
Madison, WI 53706