[TRNSYS-users] Error 1000 ? Help

[gizmoog]

OK, it works now. Actually, I'd copied the dlls in Release and Debug but 
I had let them in Userlib too...)

many thanks for your help.
gizmoog

Hermann Schranzhofer a écrit :
> Look at https://www.cae.wisc.edu/pipermail/trnsys-users/2007/002115.html
> You have to be carefull with the dll files. There should be no dll file in ..\Trnsys16\UserLib
> Move them to ..\Trnsys16\UserLib\ReleaseDLLs\  or 
> ..\Trnsys16\UserLib\DebugDLLs\ depending on the 
> mode on which your external DLLs were compiled 
> and linked.
>
> This happens for example if you install the TESS libs, because the installation copies the dll into ..\Trnsys16\UserLib
>
> Good luck
> Hermann
>
> _______________________________________________________________
>
>  DI Dr. mont. Hermann Schranzhofer
>  Institut fuer Waermetechnik / Institute of Thermal Engineering
>  TU Graz / Graz University of Technology  	
>  Inffeldgasse 25 / B, A-8010 Graz	
>  
>  Tel.: +43 316 873 7314
>  Fax : +43 316 873 7305
>  http://www.iwt.tugraz.at/
> _______________________________________________________________
>  
>  
> -----Ursprüngliche Nachricht-----
> Von: gizmoog [mailto:gizmoog at free.fr] 
> Gesendet: Donnerstag, 23. August 2007 17:10
> An: trnsys-users at engr.wisc.edu
> Betreff: [TRNSYS-users] Error 1000 ? Help
>
> Dear all,
>
> I haven't run trnsys for several weeks and sudenly, when I launch the
> simulation, I've got a TRNSYS ERROR # 1000, saying to check the listing
> file for more information but I can't find any information in that file...
>
>  
>
> Can someone help me ? pleeease...
>
> gizmoog
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at engr.wisc.edu
> https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
>   
> ------------------------------------------------------------------------
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at engr.wisc.edu
> https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
>