[TRNSYS-users] TRNDll.dll

[David Bradley]

Mohammad,
   The TRNDll.dll file needs to be located in the \Trnsys16\Exe\ 
directory. If it isn't there, you can get that error. I have also 
seen that error when the TRNDll.dll file is too big. At the time, I 
got a warning from the compiler that "the image is large any may not 
load correctly" This was some years ago and I was using TRNSYS on a 
laptop that was even older so I think that there was insufficient 
memory. If the TRNDll.dll that you built and the one that was 
distributed are about the same size then this is likely not the problem.
Cheers,
  David


At 09:42 4/25/2007, mohammad abdunnabi wrote:
>Dear All;
>
>I've succeeded to rebuilt TRndll.dll by using IVF9.1.033_IA32 and 
>TRNSYS16.1 last time ago, however, when I re-installed those 
>programs again I have got problem. the rebuilt process is going fine 
>(succeeded for both projects Trndll and Type155 as provided with the 
>package) but when I run trnsys project I get the following message:
>
>Did not find TRNDLL.dll
>
>Does any could help me in solving this problem.
>
>Thanks in advance
>
>M. Abdunnabi
>
>__________________________________________________
>Do You Yahoo!?
>Tired of spam?  Yahoo! Mail has the best spam protection around
>http://mail.yahoo.com
>_______________________________________________
>TRNSYS-users mailing list
>TRNSYS-users at engr.wisc.edu
>https://www.cae.wisc.edu/mailman/listinfo/trnsys-users

****************************************************************************************
Thermal Energy System Specialists (TESS), LLC
David BRADLEY                           2916 Marketplace Drive - Suite 104
Partner                                        Madison, WI 53719
Phone: (608) 274-2577 USA
Fax: (608) 278-1475
E-mail: bradley at tess-inc.com
Web Pages:  http://www.tess-inc.com     and      http://www.trnsys.com

"Providing software solutions for today's energy engineering projects"
****************************************************************************************