[TRNSYS-users] (no subject)

[Diego A. Arias]

Dear Robert,

After you create the proforma, save it in a place where the Studio can 
reach it, i.e., in the directory Studio\Proformas\MyComponents. Then, go 
to menu 'Direct Access' and select 'Refresh tree'. This instruction will 
make the proforma accessible from the Direct Access Tree.
Best regards,

Diego

Robert.Haberl at solarenergy.ch wrote:
>
> Dear TRNSYS users,
>
> I do not know how to include a new type into my studio project.
>
> I`ve got a TRNEDIT application including the type and the DLL, but no 
> *.tmf file. I copied the dll into the userlib folder and created a new 
> component with the given Inputs, Outputs and Parameters but I don’t 
> know whats the next step.
>
> Can anybody help me?
>
> Yours,
>
> Robert Haberl
>
> __
> Robert Haberl
> Institut für Solartechnik SPF
> HSR Hochschule für Technik Rapperswil
> Oberseestrasse 10
> CH-8640 Rapperswil
> Phone: +41 (0)55 222 48 32
> www.solarenergy.ch <http://www.solarenergy.ch>
> Robert.Haberl at solarenergy.ch <mailto:peter.vogelsanger at solarenergy.ch>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at engr.wisc.edu
> https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
>   


-- 
Diego A. Arias
TRNSYS Coordinator
Solar Energy Laboratory
University of Wisconsin - Madison
1500 Engineering Drive
Madison, WI 53706