[TRNSYS-users] runtime error

[Diego A. Arias]

Dear Nick,

I was not able to reproduce the error.  I tried your project file in 
versions 16.00.0038 to 16.01.0002, and in all of them the simulation 
runs fine.  I do not know which version you are using.  My 
recommendation is that you download the latest version and check if you 
still get the error.   Please do not hesitate to contact me if you still 
get this error in the latest version.
Best regards,

Diego


Nick van der Valk wrote:
>
> Dear trnsys-users,
>
>  
>
> With an simple trnsys-16 model, consisting of a weather data reader 
> and a online plotter, I get the following error messages:
>
>  
>
> forrtl: error (63): output conversion error, unit 6, file c:\program 
> ..... .lst
>
> Integer overflow
>
> An unexpected error was encountered and TRNSYS will abort
>
>  
>
> I have attached the files of the model.
>
>  
>
> Does somebody know what is going on?
>
>  
>
> Regards Nick
>
> ---------------------------------------------------------------
>
> dr. ir. N.C.J. van der Valk
>
> Cauberg-Huygen Raadgevende Ingenieurs BV
>
> Bezoekadres: Boterdiep 48, 3077 AW ROTTTERDAM
>
> Postadres: Postbus 9222, 3007 AE ROTTERDAM
>
> Telefoon: 010 - 4 25 74 44
>
> Fax: 010 - 4 25 44 43
>
> Web: http://www.chri.nl <http://www.chri.nl/>
>
> E-mail: mailto:n.vandervalk at chri.nl
>
>  
>
>  
>
> ------- DISCLAIMER-------
>
> Op deze e-mail is een disclaimer van toepassing:
>
> A disclaimer is applicable to this e-mail, please refer to:
>
> www.chri.nl/emaildisclaimer
>
>  
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at engr.wisc.edu
> https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
>   


-- 

Diego A. Arias
TRNSYS Coordinator
Solar Energy Laboratory
University of Wisconsin - Madison
1500 Engineering Drive
Madison, WI 53706