[TRNSYS-users] from SimCad to TrnBuild

[Filippo Busato]

Hi everybody.

I experienced the following problem.

1) I compiled a .bui file in SimCad;
2) I opened the .bui file in notepad, and it shows for each walltype the 
layer sequence;
3) I opened the  bui file in TrnBuild, and the Walltype manager shows no 
laryer for the walls;
4) I then opened the .bui file in notepad, and it doesn't show the layer 
sequence in the walltype.

Has anybody else experienced such a problem? Can anyone help?

Thanks in advance
Filippo

-- 

------------------------------------------------------------------------------------------ 

Filippo Busato - PhD
ingegnere

Università degli Studi di Padova
Dipartimento di Tecnica e Gestione dei sistemi industriali
Str.lla S.Nicola, 3 - 36100 Vicenza (VI)

Skype: foucault76
mailto: busato at gest.unipd.it
homepage: http://www.gest.unipd.it/~busato 
<http://www.gest.unipd.it/%7Ebusato>
tel: +39 0444 998753
fax: +39 0444 998884
mob: +39 347 1207174
------------------------------------------------------------------------------------------

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20061030/1a10559a/attachment-0001.htm>