[TRNSYS-users] several building blocks and type 56

[Dr.-Ing. Karl-Christian Rauch]

Hello raf,

 

perhaps you are interested to read (though in german) the special chapter within my
dissertation “Investigation of the performance of a multi-boiler-plant to supply for a
colony with long-distance heating” (in german: Untersuchung des Betriebsverhaltens einer
Mehrkesselanlage zur Fernwärmeversorgung einer Wohnsiedlung) which starts on page 115 and
ends on page 167. A very compact formula (p. 162f) which I used to simulate and to
validate the measured and recorded values could be a rough but good model to be build in
an own TRNSYS type to be able to do some investigations in your direction.

 

The mentioned colony “Gartenstadt Düppel” lies in the South-West of the former Berlin
(West) where I have done my investigations.

 

You will find this work on my internet presentation  www.dr-rauch.eu
<http://www.dr-rauch.eu/>  under the topic “Publikationen” and here under the downloadable
pdf-document of my dissertation.

 

Best regards

Christian

 

 

------------------------------------------------------------------------------------------
------------

Dr. Karl-Christian Rauch

IT – Beratung – Entwicklung – Schulung

 

Certified Development Consultant SAP NetWeaver '04 - Appl. Dev. Focus ABAP

Certified SAP R/3 Application-Consultant ‚ABAP/4 Development Workbench’, Rel.3.x

Java J2EE Architect and Developer

Tivoli Certified Consultant IBM Tivoli Storage Manager V5.1

 

Arnethstr. 15

D 48159 Münster

E:  rauch-muenster at t-online.de

W: www.dr-rauch.eu

M: +49 (0)170 4757304

T:  +49 (0)251 26529594

F:  +49 (0)251 26529595

  _____  

Von: trnsys-users-bounces at engr.wisc.edu [mailto:trnsys-users-bounces at engr.wisc.edu] Im
Auftrag von Gorissen, R.
Gesendet: Donnerstag, 16. November 2006 13:46
An: trnsys-users at engr.wisc.edu
Betreff: [TRNSYS-users] several building blocks and type 56

 

Dear trnsys users,

 

I wonder if someone has experience with modeling a somewhat larger communal heating system
consisting of several different and independent building blocks (using the same climate
data). The peak load of the different blocks will not be entirely the same so the total
load is not just the load profile of one building, times the number of buildings. In
trnsys 15 it is not possible to use more than one type 56 within one project. Is using
different zones in type 56 in the same project  a solution? or generating the different
heating demands in different project and combining (summing) them in a data file?

 

Regards, raf. 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20061120/8bfe74bb/attachment-0005.htm>