[TRNSYS-users] Stand Alone Solar Home System

[Diego A. Arias]

Dear Sonam,
 From your description, I do not know what may be happening with your 
simulation.  I will be happy to look at your files and see what may be 
wrong.
Best regards,

Diego

sonam_ede20211 at rbit.edu.bt wrote:
> Hi,
> I have designed a stand alone solar PV system using Trnsys. The output power from the PV array is large enough. But the final load output from the 48d inverter after passing it through 47a battery is very low. The load power required is given as input to the inverter. 
> What could be the problem, can anyone please suggest anything to this problem.
>
> Sincerely,
> Sonam
>   
> ------------------------------------------------------------------------
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at engr.wisc.edu
> https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
>   


-- 

Diego A. Arias
TRNSYS Coordinator
Solar Energy Laboratory
University of Wisconsin - Madison
1500 Engineering Drive
Madison, WI 53706