[TRNSYS-users] TRNFLOW and relative humidity

[Pol Olivier]

Hello,
I am using TRNFLOW to calculate the air flow between different zones (in the case of one volume, I defined a fictive "large opening" between the lower and the upper part of the room).
As I want to calculate the relative humidity, I get the following message:
 
Small internal timesteps (<0.1% of simulation timestep) used for humidity calculations due to large coupling air flows between zones!
 
How could I reduce the calculated air flow or is it another way to solve this problem?
 
Thank you for your help,
 
Olivier.
 
 
____________________________
arsenal research

Geschäftsfeld Nachhaltige Energiesysteme / 
Business Unit Sustainable Energy Systems


DI Olivier Pol

Austria, 1210 Vienna, Giefinggasse 2
ph: +43 (0) 50550-6592, f: +43 (0) 50550-6613
mobile: +43 (0)664/ 62 07 890
olivier.pol at arsenal.ac.at <mailto:olivier.pol at arsenal.ac.at> 
www.arsenal.ac.at <http://www.arsenal.ac.at/> 
_________________________
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20060505/0ca9bf40/attachment-0005.htm>