[TRNSYS-users] Double Skin Facade modeling

[Nicolas Heijmans]

Dear Antoine and others,

 

You will find the document provided by Stefan as well as many other documents related to double skin façades on the following website:

www.bbri.be/activefacades/

 

Kind regards,

 

Nicolas Heijmans

 

Belgian Building Research Institute (CSTC - WTCB - BBRI) 
tel.: + 32 2 655 77 87 fax: + 32 2 653 07 29
Please, note that I can not receive any email with potentially dangerous attachments.  

 

________________________________

From: trnsys-users-bounces at engr.wisc.edu [mailto:trnsys-users-bounces at engr.wisc.edu] On Behalf Of Stefan de Kool
Sent: 23 May 2006 14:25
To: trnsys-users at engr.wisc.edu
Subject: Re: [TRNSYS-users] Double Skin Facade modeling

 

Dear antoine,

 

I found a document on double facades in my archive, perhaps it can be of use.

 

Kind regards,

Stefan

 

________________________________

Van: trnsys-users-bounces at engr.wisc.edu [mailto:trnsys-users-bounces at engr.wisc.edu] Namens Bourgeois, Denis
Verzonden: dinsdag 23 mei 2006 14:01
Aan: antoine colen; trnsys-users at engr.wisc.edu
Onderwerp: Re: [TRNSYS-users] Double Skin Facade modeling

 

Antoine,

If it's of any help, Dirk Saelens (Dirk.Saelens at bwk.kuleuven.ac.be) coupled his multiple skin facade model to Type 56 within the scope of his doctoral work. Until last year, you could download his thesis from the buildingenvelopes.org site ... unfortunately no longer active.

Denis Bourgeois, Ph.D.
Boursier post-doctoral CRSNG / NSERC Visiting Fellow
Institut de recherche en construction / Institute for Research in Construction
Conseil national de recherches Canada / National Research Council Canada
denis.bourgeois at nrc-cnrc.gc.ca



-----Original Message-----
From: trnsys-users-bounces at engr.wisc.edu on behalf of antoine colen
Sent: Tue 2006-05-23 04:12
To: trnsys-users at engr.wisc.edu
Subject: [TRNSYS-users] Double Skin Facade modeling

Dear TRNSYS users,

I'm a belgian student from de University of Liège. I would like to
model a Double Skin Facade on the TRNSYS software. Could somebody
explain me how to model this kind of facade ? I'm interested to all
information about this subject.

Yours sincerely,

--
Antoine Colen
Ingénieur industriel (Institut Gramme)
D.E.S. Energie - Environnement (Ulg)

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at engr.wisc.edu
https://www.cae.wisc.edu/mailman/listinfo/trnsys-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20060524/c15cd458/attachment-0001.htm>