[TRNSYS-users] flow controller in trnflow

[Nick van der Valk]

Dear transys users,

 

I have a problem with implementing a flow controller in trnflow. The air
flow through the controller stays zero, whatever I try. This is not the type
of control I wished for!

 

To illustrate the problem, I have attached a small test model. In this test
model, the input parameters of the controller are copied from the
trnflow-manual.

 

What am I doing wrong?

 

Regards Nick

 

---------------------------------------------------------------

dr. ir. N.C.J. van der Valk

Cauberg-Huygen Raadgevende Ingenieurs BV

Bezoekadres: Boterdiep 48, 3077 AW ROTTTERDAM

Postadres: Postbus 9222, 3007 AE ROTTERDAM

Telefoon: 010 - 4 25 74 44 

Fax: 010 - 4 25 44 43

Web:  <http://www.chri.nl/> http://www.chri.nl

E-mail:  <mailto:n.vandervalk at chri.nl> mailto:n.vandervalk at chri.nl

 

 

------- DISCLAIMER-------

Op deze e-mail is een disclaimer van toepassing:

A disclaimer is applicable to this e-mail, please refer to:

www.chri.nl/emaildisclaimer

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20060330/aab6c173/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: testje.TPF
Type: application/octet-stream
Size: 56244 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20060330/aab6c173/attachment-0010.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: testje_flowcont.bui
Type: application/octet-stream
Size: 22480 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20060330/aab6c173/attachment-0011.obj>