[TRNSYS-users] Type16e

[Brychta Markus]

Hi everybody!
 
I am using a radiation processor Type16e (TRNSYS16) to calculate the radiation on different orientated surfaces and to interpolate hourly input data to smaller timesteps. 
With timesteps less than 1 hour the radProc´s output is rather strange: During the first half of the day, when the change in radiation is positive, high peaks in the output occur. I´ve attached a jpg showing the input data (blue graph) and the radProc ouput (orange graph). (Both for horizontal orientation).
How can I avoid this behaviour?
 
Thanks a lot for any hints!
 
Markus.
 
 
 
 
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20060317/4bf4ab8b/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: radProc_STEP_0_1.jpg
Type: image/jpeg
Size: 72150 bytes
Desc: radProc_STEP_0_1.jpg
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20060317/4bf4ab8b/attachment-0005.jpg>