[TRNSYS-users] LITTLE ADVICE ON TYPE 60+TYPE 2

[Lorenzo Zamboni]

Dear all,
    I would like to give a little advice on the use of type 2 
(controller) with type 60 (storage tank). The new version of type 2 is 
supposed to be solved using Powell's method, however, up to me, the 
simulation is not working properly due to convergence problems (also 
bringing plenty of time). On the other hand using the old version of 
type 2 would remove that unwanted behaviour. I hope this comment could help.

cordially,
Lorenzo

-- 
||||||||||||||||||||||||||||||||||||||||||||
Lorenzo Zamboni
- Ing - PhD - 

UNIVERSITA' DI PADOVA
Dipartimento  di Tecnica e Gestione
dei sistemi industriali [DTG]

UNIVERSITY OF PADOVA
Department of industrial management 
and engineering
 
stradella S.Nicola, 3
36100 VICENZA - ITALY
phone: +39 0444 99 87 78
mobile: +39 349 73 06 450
e-mail: lorenzo.zamboni at gmail.com
        lorenzo.zamboni at katamail.com
 
||||||||||||||||||||||||||||||||||||||||||||

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20060316/e4666805/attachment-0005.htm>